1 / 3
Equipped with two standard RS485 communication interfaces for parameter configuration, changing communication baud rate, and parity bit. It operates independently of the 1200 communication speed on the HART bus.
Adopts an industrially universal module housing for easy installation and debugging.
Comes with dedicated configuration software for parameter setting of the SM100-HHE Series Intelligent Transmitter.
Support for standard MODBUS_RTU protocols.
Full support for Yokogawa HART protocol smart instruments.
Ability to customize instructions for reading special HART protocol intelligent instruments.
Isolated HART channels ensure no interference with instrument current output.
DC 12 ~ 24 V, Ripple ≤ 200 mV, Current 100mA.
116 mm (L) × 120 mm (W) × 24 mm (H).
-20 ℃ to + 80 ℃
10% ~ 80% Relative Humidity
SM100HHE supports dual Modbus outputs for redundant or parallel data processing.
Capability to connect and manage multiple HART instruments simultaneously.
The SM100HHE supports 2 Modbus outputs and fully complies with standard MODBUS_RTU protocols for seamless integration.
The device requires an input voltage of DC 12 ~ 24 V. It is important that the power supply ripple does not exceed 200 mV, with a current of 100mA.
Yes, the SM100HHE supports connecting multiple HART instruments. Each channel is isolated to ensure that the current output of one instrument does not affect others.
Absolutely. It specifically supports Yokogawa HART protocol smart instruments and offers customization for other specialized HART instructions.
The module housing measures 116 mm in length, 120 mm in width, and 24 mm in height, designed for standard industrial installation.
By operating independently of the 1200 bps speed of the HART bus, the RS485 interfaces can maintain higher communication speeds, significantly improving overall system efficiency.
