1 / 3
Eight HART devices can be connected simultaneously; all channels can be scanned both simultaneously and in parallel.
Three-terminal electromagnetic quarantine between host power supply and HART channels (min 1500V). Supports 4–20 mA signal separation.
RS485 and NET Ethernet interfaces feature a quarantine voltage of at least 1500 V.
Modular design allows for online HART module replacement in any channel, isolating the module from the host.
Independent indicator lights for each channel display communication status and equipment online status.
Fast channel-wise data refresh rate ≥ 1 second.
High-speed connectivity with RS485 and Ethernet interfaces supporting at least 100 Mbps.
Supports standard DIN rail mounting; no effect on 4–20 mA analog signal accuracy under 250 ohms loop resistance.
Compatible with HART protocol Ver5.0 and higher versions.
The equipment can connect to up to eight HART devices simultaneously. All HART channels configured for the data collector can be scanned both simultaneously and in parallel.
The equipment features a three-terminal electromagnetic quarantine between the host power supply and HART channels with an isolation voltage of at least 1500 V.
Yes, standard DIN rail mounting is supported as long as the loop resistance is ≤ 250 ohms. This does not affect the 4–20 mA analog signal accuracy.
No, field instruments are not powered by this specific equipment.
The required power supply is DC 24V, and the operating current is typically less than 80mA.
The device operates between -20°C to +75°C with a humidity range of 5% to 95% without condensation.
